As a facility manager or building owner, it is nearly impossible to know everything about everything in your building. But it is vital to know something about everything, and that goes for your facilities lighting system too. Whether you manage a warehouse, factory, or other industrial sized building or space, the lighting is a huge factor of many things including safety, productivity, and consistency in the work in your facility.

So while you don’t need to know every facility managers and building owners should know about there lighting system and how lighting can make all the difference in various amounts of ways.

1. Not all lights are created equal. This is an obvious one, not all lighting technologies are created the same and all output at different levels. Firstly you have lighting technologies that are less efficient than others. Such as metal halide and HPS which are 2-3 times less efficient than LED technology is. Then you also have efficiency based on a “product to product” basis. For example; while LED is the clear winner in efficiency over metal halide (and really any other lighting technology), one LED product from one company isn’t going to be the same as the next company’s LED product. This is where you really need to dig deep and find the company that offers the most efficient lighting products over all other companies.

Key takeaway? First, understand that LED is the most efficient in a general sense, but also understand that each company and product varies on its own personal efficiency and you should always do your homework before going with one LED product over another!

2. New lighting system upgrade costs can be reduced with rebates. This is only a true statement when you are buying commercially qualified lighting products that are DesignLights Consortium qualified. return on investment overtime by decreased energy costs associated with running your lights. Obviously this ROI period will vary depending on how long you run your lights per day on average, but especially in big facilities they almost always are used often and thus, provide a good and even quick payback period.

4. Create safer environments with a proper lighting system. With low quality light output, you create an unsafe environment that can cause various issues. Lighting fixtures that aren’t outputting the proper amount of light after a few years into there life is all caused reasoning to retrofit over fully replace.

There’s no question that LED lights are the best option for fleet vehicles—or any vehicle for that matter. They consume 90 percent less energy than incandescent bulbs and last about 42 times longer. Because fleet vehicles are constantly in motion, long-lasting LED lights can be of extreme benefit to trucking companies. A longer life span means dramatically lower maintenance and replacement costs as well as a reduction in downtime.

We have LED lights for Peterbilt, Kenworth, Freightliner, Volvo, International, Mack, and Western Star trucks as well as box trucks, tow trucks, dump trucks, and more. Options include LED tail lights, LED brake lights, LED marker lights, LED reverse lights, and LED clearance lights. These truck lights are available in a wide variety of styles, shapes, sizes, intensities, and connector types. Take a look through the categories below to see some of what’s available, and visit the links for complete product lists.

All of our LED truck lights meet DMV FMVSS 108 requirements and are protected by a lifetime warranty to guard against manufacturer defects and malfunctions. Mounting accessories are available under the accessories tab on each product page.

Options include multi-function combo boxes. Rear combination lights can be mounted vertically or horizontally on either side of box trucks, tow trucks, dump trucks, trailers, and flatbed trucks. The all-in-one lamps can be used as tail lights, brake lights, parking lights, turn signals, reverse lights, and running lights. Light heads can be rearranged for customized positioning.

Multi-function combo box lights have red and white LEDs and can be used as rear reflex reflectors, turn signal lights, hazard warning lights, reverse lights or backup lights, brake lights, and tail lights. Separate LEDs are positioned on the bottom of the box for license plate illumination.

There was a time when buying light bulbs used to be a much easier task than it is today. Then along came LED, CFL, and light bulbs bent on reducing energy. With this, the good old incandescent started losing their place on our bulb holders. Gone are the days when finding a bulb for your home just meant looking at the wattage on the box. If a bulb was rated 100 watts, you knew it would be 25% brighter than a 75-watt one.

An entirely new rating system is now used and this has been giving shoppers grief for quite a while. At the center of this confusion is the word ‘lumens,’ which appears along its older and more familiar cousin ‘watts.’ Learning about lumens is the price you pay to help keep our planet safe. Don’t worry, though. We will tell you everything you need to know about the new lights rating system.

Lumens are units used to measure how much light a bulb puts out. Watts measure how much electrical power the bulb uses. With incandescent bulbs, the expected brightness pretty much depended on the wattage of the bulb. One lumen is equal to the amount of light given out by a birthday candle.

The idea with energy saver bulbs is to use fewer watts and produce more power. Incandescent bulbs produced by different companies are pretty uniform. On the other hand, energy saver bulbs are so varied, you don’t know if two 50 watt bulbs will be equally bright. This is why CFL and LED bulbs have lumen figures printed on them while incandescent varieties only have wattage.

When you hear “lumen per watt”, think miles per gallon. This is a measure of efficiency. It measures how many lumens of electricity a bulb can produce when using up one watt of electricity. This is the factor that should interest you the most when you are buying light bulbs. The first step is to figure out the brightness you want in lumens. If you want a brighter room, go for a bulb with more lumens. To dim it down, consider a bulb with a smaller lumen rating. Also, find the lumens per watt rating to determine which bulb has the greatest efficiency. Usually, the lumens per watt rating is an average, as bulbs reduce in efficiency with time. The lumen per watt rating is calculated by dividing the brightness in lumens a bulb offers by the number of watts it takes to produce.

Watts can be converted into lumens by multiplying the lumens per watt rating by the brightness.

The Federal Trade Commission now requires a product information summary, called the Lighting Facts label, to be attached to every lighting product. Another label that you should be on the lookout for is the Energy Star mark. The system was created by the Environmental Protection Authority in 1992 to govern the energy consumption of various household and industrial appliances. When it comes to lighting, this mark is put on bulbs that have met a certain lumen per watts threshold. This mark effectively spells impending doom for incandescent bulbs because they do not come anywhere near fulfilling these new efficiency ratings. If you are not into reading the fine prints and making calculations, the Energy Star logo will make your life easier. Look for the label on light bulbs to ensure you are getting a good deal.

The chart below can help to understand the Energy Star system.

This chart is an excellent indicator of how incandescents measure up to energy savers.

Aside from the fact that you have one more bullet in your trivia arsenal, your hunt for light bulbs should now return to the simple task it should be.

For a business, uninterrupted supply of electrical power and faultless operation of machines and equipment is a must to ensure success. This is true for most businesses today, regardless of the industry they are in and the scale of their operation. After all, your employees won’t be able to work if their computers don’t receive a constant power supply. The inventory in your warehouse may get spoiled if the cooling and heating systems you have installed there are not functioning at an optimal level. So, it won’t be wrong to say there is much that can go wrong, electrically, for a business.