There has been a sea change in electrical safety systems for residential and commercial properties and these systems are significantly safer than the ones that existed even up until 5 years ago. Even if you have new installations on your property, you need to make some effort to prevent electrical accidents.

This means you have to ensure that the electrical infrastructure in your home is of a high-grade and that it’s well-maintained. It’s also important to make smart choices with reference to using various heat-producing appliances and extension cords. Here are some tips that will help make your home a safer space:

Electrical safety is about ensuring that every fixture, fitting and installation is updated and in a good condition. The power points are one of the most important electrical components on your property. Since these are the ones you come in contact with very regularly, they do become worn and damaged sooner than the other parts of the system.

Since they are the points of contact for various electrical appliances in your home, there is also the possibility of sparking. This is how they become a very common source of residential electrical fires. If you have noticed consistent sparking from these points or if any of the wires appear to be damaged or loose, it’s important that you call in a licensed and reliable electrician to get these fixed.

It’s a good idea to get a full electrical audit of your property. The electricians will quickly identify whether there is any damaged, deteriorated or faulty electrical system that has the potential to cause a fire. If you find the circuit breakers on your property tripping too often, it could mean that circuit is unable to bear the load of the appliances that are operating on it. If this is left unattended, it too could pose a fire risk.

If you find that you are using too many heavy duty appliances like gas stoves, dryers, microwaves and dishwashers on the same circuit, it’s important to spread them across different circuits. Your electrician will be able to handle this job expertly and will provide advice on what the best option would be.

While power strips and extension cords may seem like a convenient solution, they should never be used a permanent option. Long-term use might be required in areas like entertainment rooms or for computer systems; however these should be checked with regularity and replaced at the first indication of a defect/damage. It’s also very important that you don’t overload the extension cords and power strips.

These appliances can also become the cause of an electrical fire. These can’t be strictly categorized as electrical fires; however, if there is any kind of combustible material in the vicinity of these appliances, the heat that emanates from the latter can ignite the materials and cause a fire.

As a thumb rule, it’s important to keep combustible materials away from all heat and electrical sources. For instance, if you use space heaters it’s important to follow the safety instructions mentioned by the manufacturer. Newer model space heaters have more reliable fire prevention features and its best to consider buying a new one.

We at Allround Electricals are a reliable company with years of experience behind us. Our experts can come and conduct audits and provide preventive electrical maintenance services for your commercial and residential property. For more information, contact our friendly team at this number – 1300 169 263. Alternatively, you can also write to us at this email address.

Thanks for reading,1300 169 263

If you’ve been contemplating upgrading your home electrical system with your very own solar panel installation, there is no better time than summer. Here are a few reasons to make those dreams a reality.

The first is that you’ll get the best performance out of your system when the sun is shining the most. Of course, your solar array is going to give you energy savings all year long, especially in sunny southern California but in the summer, you’ll see impressive results right away that will really show you the potential of home solar power.

Without the threat of inclement weather preparing your home and installing your new system is much faster, translating to a more painless process for you. It also means that we have more jobs in the summer, so you might need a little advance scheduling. But all that is beside the biggest reason that you should pursue a solar panel installation:

The sooner you get solar at your home, the sooner you can start saving.

As you know, power prices increase all the time, with an average increase of around five percent a year. While municipal power increases, solar power provides a point of stability for your energy bill. Your solar power will always cost the same amount, so every time municipal power increases, your savings do too.

And with generous tax rebates and solar leasing agreements, you can establish an impressively low cost investment on your solar panel installation. You might even qualify for no down payment. You pay the cost of installation and parts over the life of your solar panel, even as you see instant deductions in your power bill.

As you can see, taking action now translates to intense savings for years to come. Don’t wait another minute. Let us help you take charge of you energy and financial future this summer.

7.  Convert the extra closet into a sewing/hobby center.  Install a custom-cut countertop and a little task light… “Viola!” You are done.

8.  Or, maybe you are not done….Why not literally “Knock Her Socks Off” and build her a bigger closet?!

Whether you are building a new closet or updating an existing one, there are specific rules for lighting an enclosed closet space.  The National Fire Protection Association’s National Electrical Code (NEC) sets standards for safety:

Because closets contain flammable material with limited ventilation, strict building codes dictate that specified lighting fixtures must be installed 18” to 24” from walls depending upon which lamp source is being used.  Surface mounted and recessed fixtures must allow for 6”-12” of clearance from any storage space, such as shelving or clothing rods.

♦Of course,these standards are not a problem for Mariah Carey whose closet is as big as a bedroom!

One of the latest changes to the NEC code is the addition of LED (light-emitting diode) fixtures.  LED lighting may cost a bit more, but energy-savings, greater illumination and safety features will prove to be well worth the investment over time.  The quality and adaptability of newer LED lighting makes it an excellent choice for closets and dressing rooms.

9.  Don’t leave Mom in the dark!  Create a cozy corner with a new den floor lamp so she may relax and read, while you watch the ball game! Try a lamp with full-spectrum lighting to elevate her spirits.

10.  Reward yourself:  Clean out the garage and carve out a space for a workshop that is all your own!

People are investing more into floor covering, cabinetry and shelving to make the most of their garage space.    Fluorescent fixtures, track lighting and simple portable lamps are making their way into upgraded organized garage systems.

Almost everything nowadays operates on electricity. The modern conveniences that drive our world depend on electricity. Without a constant supply, our world grinds to a halt, as massive blackouts have proven in the past. Electricity has two forms in modern electronics: AC and DC.

AC (alternating current), is most frequently used in devices that require high amounts of power to operate.

DC (direct current), is more commonly found in devices requiring smaller amounts of power to operate.

DC was the original electricity that was created by Thomas Edison. This style of electricity sends a current in only a single direction, from a power source and to the power source again in a loop. Today, DC is used to power electronics that require batteries. Any device in your home that uses batteries uses DC current. Interesting to note, if your battery is plugged into the power supply to recharge, it transforms AC current into DC.

Direct current is also used in manufacturing situations where electricity is generated on site for personal use. Factories and mills that require vast amounts of energy often create their own DC current to power their machinery. Most commonly, DC is found in steel mills, aluminum production, and is used to power mass transportation in large urban centers in the form of electric streetcars.

AC power is easier to generate, which is why we use it as our standard electricity nowadays. The alternating current design allows energy to flow in both directions, making electricity easier to create and use in society. Regardless of where the current is moving, it is always moving in both directions at once. This results in current being present at every point in the power grid at every time as long as the connection to the generation unit is intact. The power that comes from the power plants, down the lines to our homes, is always AC in nature, thanks to the way our modern power grid is set up.

The power grid operates by creating AC current and sending it down the power lines. This current can be at whatever intensity the power company chooses.

Frequently, the electricity coming from these lines is far too powerful to be used in our homes. The transformers that we see on power poles transform the electricity from its high-powered state into something that our homes can use. Without the transformers, we wouldn’t be able to use the power that our society depends on.

Regardless of the style that we use in our devices and our homes, electricity plays an important role in society. Without both AC and DC electricity, we wouldn’t have those things that make modern life as comfortable as it is.