Now that winter is around the corner and the temperature is already dropping, the heating bills will start to increase. Here are a few ways you can keep down your expenses this season.

Using electrical space heaters will also help you control the heating expenses. Electrical space heaters are a cheap way to heat only the rooms that you are using. They will be more efficient then turning up the thermostat for the whole house, but don’t leave them running all day. Just make sure that you keep your heaters away from curtains and furniture, and keep any children or pets from burning themselves.

For more information or any questions contact your local Expert Electric.

So when customers ask us how many ‘Watts” do I need to replace an existing light source, we always convert them to lumens.

•  Pay special attention to the lumens per watt of a fixture. IT DOES MATTER. A LED product at 135 lumens/watt will consume far less energy than a LED product producing 97 lumens/watt. Not all LED solutions are the same. (remember, always buy on the lumens you need, never on the watts you think you need.).

•  To calculate lumens per watt, take the total number of lumens a product produces and divide it by the watts it consumes.

For indoor fixtures, figure on:

utility company. You can check if a product is DLC Qualified on the DesignLights Consortium website. DLC has rebates for Commercial LED Lighting and Industrial LED Lighting

•  Rebates with DLC Premium should be higher than rebates with DLC Standard. Your utility company is typically who provides the rebates and sets the rebate amounts.  Check their website.

•  All UL Listed or ETL Listed.

•  Replacing the light parts of an existing fixture with the a Retrofit unit will not void the UL/ETL Listing of the fixture. However, the exception to this rule are explosion proof rated fixtures (ie. Class I Div 2). Never retrofit a certified explosion proof fixture. UL1598C does not cover these types of retrofits.

•  ETL Listing is the same as UL Listing. They perform the same test, and the certification is the same. The only difference is that the company who performs the test.

With the cool nights upon us, you have probably pulled out the space heater already. Maybe you get chilled when you are at your desk or sitting in your favorite chair. Sometimes, you just need a little concentrated heat blowing on you to take that chill off. Space heaters are an excellent option when you need extra heat in a room or don’t want to turn on the furnace for a little bit. However, there are some things you should know about space heater safety. Your electrician in Pasadena has some tips to make sure you are using your space heater safely. If you have any more questions about what you should be doing, give The Electric Connection a call today.

Before you plug your heater in, give it a quick inspection. Make sure mice didn’t chew the cord while you had it stored away over the summer. Any type of damage to the cord is a problem that should be looked at by an electrician. Pasadena residents can skip the electrical repair and buy a new one, which is often more cost effective. Wrapping a damaged cord with electrical tape is not always a good idea. It is better to be safe than take chances.

When you are placing your heater for usage, make sure you leave at least 3 feet between the heater and any furniture, the walls or drapes. Run the cord along a wall and out of direct foot traffic. If you don’t have an outlet near the area you need the heater, consider having one installed by a Pasadena electrician. You can use an extension cord, but you will want to make sure the cord is not run across a pathway either. You don’t want the cord becoming loose and it possibly sparking against the carpet. Give The Electric Connection a call today if you need an outlet installed or have any additional questions.

Outdoor LED Decorative String Lights

When paired with vintage LED bulbs, these LED string lights add a spooky feel to your patio. The 21-foot LED light socket strings hold 10 LED bulbs with standard E26 bases. They’re available in in-line styles and are linkable up to 500 watts maximum.

Use this submersible RGB LED Accent Light to give your fountain an eerie glow. Place it under spooky glass decorations or inside a pumpkin, and use the included IR remote to select colors and color-changing modes. This LED Halloween light offers 13 static color modes and two dynamic color-changing modes.

30- or RF Touch-Color Remote (sold separately) or with a Halloween product category.