When you hear something a lot, you tend to brush it off. Warnings about changing the batteries in your smoke detector are heard so often, it is easy to push the advice to the bottom of your to do list. When the smoke detector beeps incessantly, it is easier to pull the battery out with the idea you will put a new one in tomorrow. All of these seemingly innocent plans can actually be extremely dangerous. You never know when a fire will break out in your home and often times, it happens when the batteries are out of the smoke detectors. A good option for every home is to have hard-wired smoke detectors installed by a Los Angeles electrician like those at The Electric Connection.

Hard-wired smoke detectors remove the risk of a fire going undetected by a smoke detector without batteries. The smoke detectors are wired directly into the home’s main power by an electrician. Los Angeles homeowners will take comfort in knowing that as long as the power is on, the smoke detectors are functioning. There is a place to batteries in the detectors to act as a backup system should there be a power outage. This ensures the home is always protected, even if somebody borrowed the battery out of the smoke alarm.

You should invest in at least one hard-wired smoke detector on each floor and in the garage of your home. Another benefit to having these devices installed by a Los Angeles electrician is the fact they are all interconnected. When one alarm is sounded, all of the detectors will go off. This means if there is smoke detected in the garage, you will know about it if you are upstairs in your room. These tools can save lives. Give The Electric Connection a call today and schedule your smoke detector installation.

We often use the time change as a way to remind ourselves to change the batteries in our smoke detectors. We do this because it is important our homes are protected as well as the people in our homes. In fact, there are plenty of things we do on a daily basis to ensure the safety of our home. One of the things that are often overlooked is the safety of the actual home. What is going on behind the walls? Is the electrical wiring safe? One way you can determine the electrical safety of your home is by calling an electrician in Santa Monica and scheduling an electric safety inspection. The team at The Electric Connection can take care of this for you and help set your mind at ease.

A home electric safety inspection can help identify potential problems before they become serious fire risks. The inspection will give you a better idea of what kinds of dangers are lurking behind the walls. If you live in a home that is more than 50 years old, you could be dealing with some outdated wiring issues. An electrician will be able to tell you if you are due for an upgrade or if your wiring is up to today’s codes.

The electrician will investigate your Santa Monica electrical system and notate any items that could use repair or replacement. You will always have the option of taking care of the repairs immediately or waiting until there is a better time. Some things that are often found on these inspections are the old style outlets in the kitchen and bathroom areas. Nowadays, the standard calls for GFCI outlets to be used in areas that are around water. If you would like to learn more about your home’s electrical system, give The Electric Connection a call today and schedule your home electrical safety inspection.

2. In order to open the headlight housing, it must be heated to soften the glue that seals it. Preheat the oven to 270 degrees Fahrenheit, and place the housing in the oven (top rack). Heat the housing for approximately seven minutes. Note that this time will vary by vehicle manufacturer and that you should be careful not to overheat your assembly. Also note that the headlight will be hot when removing it from the oven, so take care not to burn yourself.

*Please note that this can damage your headlight assembly and that you do so at your own risk.

4. LED angel eye installation will vary by headlight. In this instance, we mounted an

5. Place the second layer back in the housing to ensure that everything is aligned the way you would like. This is also a great time to clean the inside housing, as you will not be able to do so once you reseal it. The cleaner you get it the better; smudges and dirt will be more visible when the lights are on.

8. Now it’s time to reseal the headlight housing. Preheat the oven to 270 degrees again, place the layers together, and put the headlight in the oven (with halo rings installed) for seven minutes. Remove the headlight from the oven, and press the layers together firmly as you work around the lens to ensure all of the edges are sealed (this might require gloves, as the headlight will be somewhat hot). Be careful to only press on the edges so as not to warp the lens.

*Please note that this can damage your headlight assembly and that you do so at your own risk.

10. With the headlight housing installed, complete your wiring, and test connections to ensure proper installation. Be sure to tape/heat-shrink any wiring connections that were added, and clean up any loose wiring.

Alexai Erchak, while a graduate student at the Massachusetts Institute of Technology, is credited with developing the first prototype high efficient LED in 2001.  These LEDs use specialized mirrors and tiny photonic crystals to generate more usable light from the semiconductor materials.  Erchak observed that the Swallowtail butterfly highlights their fluorescent blue and green colors with a natural illumination much like that of his specialized prototype, and he was astounded at the similarity between the natural brightening structures in the butterfly’s wings and his own LEDs.

So much we learn from nature! The appeal of new designer outdoor lighting captures the essence of natural beauty and wonders of the world.  Make way for the butterflies and new designer outdoor lighting.

The “butterfly effect” is a phenomenon or belief that the flapping of a butterfly’s wings in one sector of the universe may be related to a tornado occurring in another part of the world. Could it be possible that the gentle vibrations in the wings of a butterfly could be the pivotal mechanism that leads to the ultimate surge of a storm cloud?  Is it science fiction or is there some truth to it?

Either way, there is no denying that the effect of designer outdoor lighting significantly increases the beauty and property value of our home.  And, the latest designs are eco-friendly, sustainable and made to last.

Bask in the splendor of summer style with these super natural compositions.

Novel summer finishes include this Raw Copper with iridescent glass from Arroyo Crafsman.  Arroyo Craftsman designs and manufactures fine outdoor lighting that honors the traditions of elegant simplicity combined with a quality craftsmanship established by the founders of the American Arts and Crafts movement. Arroyo’s designer outdoor lights are inspired by famed styles such as the California Mission, Swiss Chalet and English Tudor. Each piece from Arroyo Craftsman is meticulously hand crafted in the United States and available with several hand applied finish and glass options.

Glowing Butterflies Shine With Natural LEDs

Have you ever dreamed of generating your own electricity, right in your backyard? That dream could become reality with a residential wind turbine. Wind turbines won't work for everybody, but in the right conditions, they can provide part or all of the power you need to run your home electrical work. Read on to learn more about residential wind power and decide whether home generation is right for you.

Where the Turbines Turn

Wind turbines take up more space than solar panels, and they aren't as suitable for as many properties. For starters, wind turbines work best for homeowners who have at least an acre of property. The more open space you have between buildings and trees, the better. Additionally, they are usually a better option for people who live in rural areas and don't have stringent homeowners associations or local code issues to navigate.

Small, residential wind turbines can range anywhere from 30 to 140 feet tall, with the average being around 80 feet, according to the American Wind Energy Association. Generators usually have a capacity of between 2 and 10 kilowatts, depending on how much power the home needs and what the wind conditions are in the area. Turbines aren't cheap – costs can come in between $10,000 and $70,000 – but there are federal tax credits that help soften the blow, and you can usually recoup your investment in 6 to 30 years, depending on the specifics of your system.

The Power of Wind and Solar Combined

If you want to build in a layer of redundancy in your home power generation, you can combine a wind turbine with solar energy panels on your roof so you can create power in a larger variety of weather conditions. With a powerful storage battery, you'll be well on your way to eliminating electricity bills from your life.

For wind enthusiasts who are still on the grid, you can usually sell excess power that you generate back to your utility company, similar to how the process works for solar energy, helping to drive your electricity bills even lower. A solid turbine should last for at least 20 years, and hopefully much longer, although they do require yearly inspections to keep them running in peak condition.

The U.S. Government Has Your Back

The Department of Energy publishes a consumer guide for small wind electric systems packed full of even more information. If you are interested in learning more about home wind turbines, or need other electrical work performed, call up a trusted electrician today.