Nothing is more important than your family's safety. That's why you need to make every effort to identify and eliminate fire risks in and around your home, particularly in your electrical work. Faulty wiring, delayed maintenance or carelessness can lead to a disaster that can cost you your home and endanger your life. Read on to learn more about the most common causes of electrical fires and how you can prevent them.

Power in Percentages

Electrical failures contributed to about 47,700 home structural fires in 2011, according to a report by the National Fire Protection Association (NFPA). Those fires resulted in 418 deaths and $1.4 billion in damage. Clearly, the stakes are high in making sure that the electrical work is safely installed in your home.

According to the NFPA's report, 48 percent of home fires caused by electrical failure were started by the electrical distribution and/or lighting systems. Of that 48 percent, 63 percent were started by wiring, 20 percent by lighting, 11 percent by cords and plugs, and 6 percent by transformers and power supplies.

Fans caused an additional 6 percent of electrical fires, washers and dryers another 6 percent, space heaters 4 percent, air conditioning 4 percent, water heaters 3 percent and stovetop ranges 3 percent.

Don't Become a Statistic

The good news is that electrical fires have declined steadily since the 1980s. Modern technologies and building techniques have lowered the risk of fire and kept everyone safer. However, there's no reason to be complacent when it comes to safety. To decrease your risk of falling victim to a fire caused by your electrical system, follow these tips:

Keeping Your Family Secure

Stay vigilant about maintaining your electrical equipment and follow all safety recommendations to reduce your risk to a minimum. If you are concerned that your home is at risk of fire, have a qualified electrician inspect your electrical work and point out any danger areas without delay.

Have you recently had a home inspection completed or are you getting ready to purchase a home and don’t understand the inspection report? A certified electrician at ElectricMan can help you figure out exactly what the inspector found and what it all means. Having your home inspection deciphered by ElectricMan can save you time, money and a lot of stress.

Here are some examples of the most common home wiring problems that a certified electrician can remedy:

These problems may be eyesores, or perhaps you don’t notice them at all, but almost all of them can be hazardous and require immediate attention by a certified electrician. Before you start worrying about your latest home inspection and get knee-deep in all the repairs at once, ElectricMan can help you decode each project and give you a quote on needed repairs. Remember, it’s about your family’s safety, so it’s always best you pick your electrician based on the quality of work and his reputation rather than letting the seller pick the repairman.

If you suspect your home is subject to some of these problems, or for help interpreting your home inspection contact a certified electrician at ElectricMan today. ElectricMan is a trusted, local Dallas electrician with 27 years of experience. For more information visit the ElectricMan website and don’t forget to ‘like’ us on Facebook and follow us on Twitter, Pinterest and YouTube.

Are you having problems with some of the outlets in your home? While actually trying to repair an electrical outlet on your own can be dangerous, you can at least diagnose many of the most common electrical outlet problems. Before you call Kolb Electric, see if you can pinpoint the problem by trying the following steps.

If you were trying to plug something into the outlet and it wasn’t working, try plugging it in somewhere else. If it works, it’s likely a problem with the outlet. If it still doesn’t work, the problem is with the device itself.

Look for any wall switches and turn them on. If the appliance works after flipping the switch, you shouldn’t have any further problems.

Check other outlets near the dead one. If any more don’t work, mark them with tape.

Unplug everything from nearby outlets to eliminate the possibility of a short or overload.

Make sure the circuit breaker isn’t tripped. The circuit breaker will be located in the breaker box, usually in the garage, basement, or kitchen. To see if it is tripped, open the box and see if any of the breakers are in the RESET or OFF position. If they are, turn the appliance off, switch the breaker back into the ON position, then try to device again.

Check for blown fuses. To do this, turn off the main switch and use a flashlight to see if any of the fuses are burnt or blackened.

If the dead outlet is a GFCI (Ground Fault Circuit Interrupter), try to find out if there’s any reason it may be tripping. GFCIs shut off power to outlets when they detect a leak in electrical current, so if they continue to trip after being reset, there could be a dangerous current leak that requires an electrician’s attention.

If you have dead outlets in your home, or if you need electrical troubleshooting in Maryland, Virginia, or Washington, DC, call Kolb Electric today!