You have probably turned on your furnace already this year or pulled out the space heaters to help warm up your room. It won’t be long before you start to see your electric bill rise with the cost of heating your home. There are some things you can do to help keep your electric bill down and more money in your pocket. Your neighborhood electrician has some best practices to help you reduce the amount of electricity you use on a daily basis. For more information, call The Electric Connection.

1-Turn the thermostat down a couple of degrees. You can wear a warm sweater or some thick socks while you are at home. At night, turn the thermostat down a couple more degrees since you will be sleeping with blankets.

2-Unplug your cell phone charger as well as tablet and laptop chargers when you are not using them. It may seem small, but every charger pulls a little electricity even when nothing is plugged in.

3-Switch out your old incandescent bulbs with CFL or LEDs. You may need to change out your light fixture, which your electrician can do for you. The investment in a new fixture will pay for itself when you save money on your monthly lighting bill.

4-Turn down the temperature on your water heater a few degrees. It is unlikely you would use water that is 125 to 140 degrees anyways. If you can’t use water that hot, it doesn’t make sense to waste the electricity heating it to that point.

5-Make it a rule you only wash full loads of dishes in the dishwasher and only full loads in the washer. Try washing clothes with cold water when possible.

6-Invest in heavy curtains to block the chilly air coming in through the glass in the winter and block the heat of the sun in the summer. This will keep your home more comfortable and save you money on your electric bill.

If you have any more questions for your electrician about energy savings, give The Electric Connection a call today to see what else you can do to save some cash.

— Electric Connection (@LAElectricianCA) December 15, 2015

The commercial electricity for HVAC systems accounts for about 50 percent of a building’s total energy consumption. Being one of the major energy costs in a manufacturing facility, it dominates the building’s peak electricity demand. As such, improving the system’s efficiency, in order to cut energy costs, should be every facility manager’s priority.

The energy consumption depends on the climate, comfort preferences, building design, insulation, the timing of use, the size of the HVAC system, heat generated by electrical equipment, and other site-specific factors.

Building owners and businesses can reduce their energy costs by combining several measures that increase an HVAC system’s efficiency while reducing the demand for heating and cooling.

When selecting HVAC systems, pay attention to its design and controls. Components such as motors can impact heavily on the running costs of equipment because some are usually oversized to meet peak demands. An ideal system should have more variable speed control, inverter controls, economizers, demand controlled ventilation, advanced sensors and monitoring, as well as superior diagnostics. In addition, the system should be the appropriate size; not too small or oversized.

By controlling and running the HVAC motors at speeds based on the heating or cooling needs, consumers are able to realize energy savings of between 30 and 50 percent compared to the conventional constant speed operations. Most manufacturers prefer newer algorithm-driven smart microprocessors.

These provide a refined speed control that responds to the changing load in the building. Instead of using on and off cycling, these controls adjust the system according to the actual cooling or heating needs of the facility. More functions can be added through software add-ons as opposed to costly hardware upgrades.

Some of the ways to optimize HVAC systems include the use of thermostats and control systems, locating the HVAC unit in the best place possible, and modifying the ventilation and distribution. These are discussed more fully below:

A HVAC energy audit helps in identifying the operational deficiencies, hence allowing the building manager to take the necessary measures to enhance performance. The audit is often necessary because it helps in determining the amount of energy use, maintenance and upgrade requirements.

Consumers can then reduce their energy costs by optimizing, replacing or retrofitting the HVAC system to become more energy efficient. This not only increases efficiency and reduces the amount of commercial electricity for the HVAC system, but also improves the air quality.

Why is a bad GFCI outlet such a big deal? To put it simply, they exist to protect you from electrical shock. As required by electrical code, these outlets are in places within your house where there is an increased risk of electrocution. These include bathrooms, kitchens or outside (wherever water is likely to be present).

GFCI outlets come with a sensor designed to identify changes in current, which can indicate unsafe conditions or the risk of shock. There’s a breaker inside the outlet, which trips when there is a surge in current. This shuts down the power supplied to the outlet and any connected outlets, protecting you from electrical shocks.

GFCIs come with two buttons on them (usually black and red), with one serving to test the outlet and the other for resetting it after the breaker inside has tripped. A bad GFCI is a serious problem, as they are too important for you to ignore them for any amount of time. It is, therefore, crucial that you stay aware of when you might have an issue with one of yours.

In the majority of cases, a GFCI outlet protects you by not providing power. If there is an issue with an appliance plugged into it, the power would likely cut off long before you even get the chance to use it. When this happens, it can be easy to assume there’s something wrong with the outlet itself. But in many cases, its breaker tripped for a good reason. GFCIs are also designed to shut themselves off in the event of a person getting shocked, which isn’t always easy for it to determine with much accuracy. In other words, your GFCI outlet breaker might trip when you’re not actually in any danger.

The GFCI detects current that branches off from the intended circuit, even if the branches are small and harmless. This can include instances of a wire making contact with another component of the receptacle, which can be completely innocent. When the cause of a trip is a passing occurrence, you should be able to reset the outlet breaker with a simple push of the correct button.

Outlets can get worn out and lose some of their effectiveness over time. This also applies to GFCIs. If your GFCI outlet is tripping much more frequently than it should, it could mean it’s nearing the end of its lifespan. This is due to GFCI outlets losing the ability to adjust to changes in current as effectively as they used to. The result is that trips begin occurring for reasons that were never a problem in the past.

If your outlet breaker is tripping every time you use a hair dryer, and it never did that before, it’s a sure sign you have a bad GFCI outlet. If this becomes the case, it’s important to get it replaced as soon as possible! These outlets are too crucial a safety measure for you to delay on getting a new, functional one.