LED cove lighting is a great way to add accent lighting or color to any room, and LED strip lights are the perfect product for the job. LED strip lights can be used for any type of RGB LED strip lights, you can choose from a ton of dynamic color-changing and single-color modes with adjustable brightness and speed control. variable color temperature strips are also available and can be used with a compatible controller and remote. Installing LED cove lighting is easy, and we’ve provided basic instructions for a standard L cove, recessed ceiling/tray ceiling cove, or crown molding cove in a 16-by-16-foot room. We recommend that you have a certified electrician wire your strip lights to power.

Tools and Optional Materials:

The way you install the strips or even the number of strips used might vary depending on the room size or the style, shape, and size of your cove. The steps and materials needed for this particular installation could be used in a room with a standard L cove, crown molding cove, or recessed ceiling/tray ceiling cove. The photos below show several different cove types.

DIY “L” Cove

Valence Cove

Crown Molding Cove

8) If desired, use a double-sided 3M foam pad to mount the amplifier in the middle of strips 1 and 3. Cut the foam pad, and use it for both amplifiers.

9) Repeat steps 6-8 for strips 2 and 4.

10) If you are experienced, connect your power supply to power. Otherwise, hire a certified electrician to set up power for your new LED cove lighting.

By providing early warning in the event of fire, smoke detectors can allow you and your family sufficient time to reach safety. Experts report that you can increase your chances of surviving in a home fire by 50% simply by having smoke detectors. Click here for more information about installing  smoke detectors in Los Angeles, my electrical company’s service area.

If your house was built before 1950, it likely has electrical wires with cloth insulation. Over time, the cloth dries out and becomes brittle. Eventually, it crumbles off the wire, exposing bare wires that can short-circuit and cause shocks or fires. Old cloth-insulated wires should be replaced with plastic-insulated wires. Plastic insulation lasts indefinitely and completely resolves the safety issue. Click here for more information about replacing cloth  wiring insulation.

The National Electrical Code requires that outlets in the vicinity of water be equipped with a device called a “Ground Fault Circuit Interrupter” or GFCI (also called GFI). GFCIs are required in all bathrooms, kitchens, garages, pools, and some outdoor areas. GFCIs can protect your family against deadly electrical shocks and are inexpensive to install. Click here for more information about GFCIs and GFIs.

Knob & Tube wiring gets its name from the white ceramic knobs around which wires were wound and the short ceramic tubes through which wires were guided. This type of wiring is usually found in homes built before 1935. In the Los Angeles and some other parts of the country, knob and tube can sometimes be seen in houses built as late as 1950. My electrical company specializes in replacing Knob and Tube wiring in the L.A. area — much of it is in Pasadena and other parts of the San Gabriel Valley.

Knob & Tube systems use old cloth-insulated wires and are not grounded. We strongly recommend that Knob & Tube wiring be replaced to eliminate fire and electrical shock hazards.

An electrical surge is a sudden increase in power that flows through electrical wires. Surges can cause damage to computers, phones, entertainment systems, microwaves, stoves, fridges, washers – any device that has electronic components such as sensors and timers. Today, that’s most appliances. A Whole House Surge Protector can save your appliances and electronic devices and save you thousands of dollars in damage.

Look for our $50 discount coupon for the installation of whole house surge protectors at www.theelectricconnection.com.

A properly grounded electrical system routes occasional leaking electricity through a “ground wire” into the ground. Without grounding, excess electricity can cause fires, damage to electrical appliances and computers, and also shocks to residents.

Older homes built under earlier electrical codes will often have outlets for two-prong plugs. This is often an indication of an ungrounded electrical system. Sometimes, the outlets have been replaced with the modern three-prong type, but without actually adding a ground wire. This can make it appear that the system is grounded when it’s not.

Even when your wiring system has a ground wire, the grounding may fail due to loose or corroded connections and splices. A qualified electrician can check your wiring with a special tester to determine if it’s fully grounded. The Electric Connection offers this testing as a free service with every electrical job that we do in the L.A. area.

There is now conclusive evidence that both Zinsco and Federal Pacific Electric (FPE) “Stab-Lok” electrical panels can fail. (Electrical panels contain your circuit breakers or fuses.) Fires and electrical shocks can result. These brands were installed in the 1950s to 1980s. The failure rates as they age are much higher than for other brands and represent a real electrical hazard. We recommend all Zinsco and FPE electrical panels and circuit breakers be replaced with modern electrical equipment. Click here for more information about Zinsco and Federal Pacific electrical panels. One of the specialties of The Electric Connection is panel upgrades. We’re possibly the most active company in Los Angeles when it comes to electrical panel replacements. We offer a free safety check of your L.A. electrical panel box with every job.

Circuit breakers and fuses protect your electrical wiring from overloads of electricity. Overloading can melt wires and cause fires and electrical shocks. Whenever a wire is overloaded, the circuit breaker or fuse is supposed to cut the flow of electricity.

Sometimes older circuit breakers don’t work fast enough and allow too much current through. Fuses can also be a safety concern. Sometimes, they’ve been replaced with improperly-sized fuses and no longer protect wires from overloading. These safety issues can be solved by installing modern circuit breakers. Click here for a coupon for a free check of your electrical circuit breaker box with your next electrical job.

Most homes have copper electrical wires. However, from the mid-1960s to the mid-1970s, over 2,000,000 U.S. homes were wired with aluminum. The U.S. Consumer Products Safety Commission has determined that aluminum wiring is hazardous as, over time, connections and splices can fail, resulting in fires and shocks.

Fortunately, a qualified electrician can upgrade an aluminum wiring system without replacing all the wires with copper. It’s possible to eliminate the fire hazard by upgrading only connection points and splices. Aluminum wiring safety retrofits should be done only by electricians specifically trained to upgrade aluminum wiring safely.

If you think it’s possible that your Los Angeles home has aluminum wiring, you can get a free checkwith your next electrical job. One of the specialties of The Electric Connection is efficient and effective safety upgrading of aluminum wiring in the Los Angeles area.

Click here to visit our website.

We all know that lowering the thermostat a degree or two in the winter will also lower our energy bills, and that turning off the lights when you leave a room conserves energy. There's a lot more you can do to protect your wallet from high utility bills. The U.S. Department of Energy shares eight ways to help you get more bang for your energy buck.

The changing seasons, like the changing characteristics of matter, present dichotomies and the challenge in life is learning to find a successful balance.  Cultivating the right lighting design is all about a successful balance. Our outdoor lighting how-to guide will help you to establish and maintain a splendid outdoor oasis to be enjoyed year-round.

Capitol Lighting Respects the Night with Champion Illumination

The trend toward outdoor living continues with expanding decks and patios and customizing outdoor kitchens for outdoor entertainment.  Also, fireplaces, fire pits, and space heaters are being added to extend outdoor living well beyond the spring and summer months.  To make these areas as comfortable, safe, and maintenance-free as possible, great lighting is key.

Capitol Lighting’s Expert Advice for Lighting Up Outdoors

The conditions are perfect for outdoor lighting installations. Learn how-to customize the perfect outdoor lighting design and : Follow along with our

1.  Consider the areas to be illuminated:

•General lighting for decks, porches and patios.

•Accent lighting for gardens, fountains, statues and unique architectural elements.

•Security lighting for walkways and driveways.

•Decorative lighting for home entry zones.

2.  Choose your power supply and be sure that all outdoor and landscape lighting fixtures are compatible with the system.

3.  Choose landscape lighting fixtures more for their lighting effects rather than their aesthetic appeal.  The decorative features of landscape lights should be secondary to the objects they illuminate. With a good lighting design, landscape fixtures will provide understated elegance to the outdoor environment during the day, as well as at night.

4.  Decide which system works best for you:  Low voltage lighting provides softer more luxurious illumination, while LED is extremely energy-efficient, low-maintenance and most durable.  Incandescent bulbs typically last 1,000-2,000 hours; fluorescent bulbs may last 10,000-15,000 hours; and, LED bulbs may last 35,000-50,000 hours.

5.  Make sure to power your lighting with the appropriate transformers and wiring. If you are thinking about adding to your outside lighting system, choose power sources that will accommodate the additional fixtures.

6.  Automated timers and motion- or heat-sensitive controls make your home appear occupied during the night and save on energy costs. Locate timers and controls in areas where they are easily accessible.

7.  All outside lighting fixtures and accessories must be selected to withstand the elements, including sun, humidity, rain, ice and snow.  Check that all items are waterproof and UL-approved for outdoor use. Copper, brass and composite fixtures are excellent for homes near the seashore where salty air may be a factor.

8.  Think about landscape lighting as part of your planning and construction in a new home environment.  Outdoor lighting designers should coordinate with landscape architects and electricians.

9.  Traditional wall lights such as wall lanterns bracketing main entryway doors help you to identify visitors and ensure their safety.  They are also appropriate for rear and side entrances and over garage doors. Be sure to select post lanterns and wall brackets that are proportional to your home.  When in doubt, size up.  Fixtures appear smaller from curbside viewing than most people would imagine. * *

10.  Take care to avoid glare and pointing fixtures into your neighbor’s property. Curb “light pollution” with shielded fixtures that focus illumination downward.  Most outdoor fixtures may be easily focused to light the environment for safety, security and aesthetics while protecting other areas from unwanted glare and profuse light. * * *

**Rule of thumb for sizing outdoor wall lanterns:  The height of the lantern should be based on the height of the door.  If brackets are to be installed on either side of the door, they should measure about one-fourth the height of the door.  If using only one lantern, size up to about one-third the height of the door.

***“Dark Sky” Compliancy and light pollution:  A man-made culprit, due mainly to poor lighting design, is a phenomenon called “light pollution.”  Light pollution is any adverse effect of artificial light, including sky glow, glare, light trespass, light clutter, decreased visibility at night, and energy waste.  Many of Capitol Lighting’s trusted manufacturers offer “Dark Sky” versions of their outdoor lighting products, which “collar” the light bulb around its base to block superfluous upward emissions of light.

Capitol Lighting’s professional lighting consultants will help you in selecting everything from timers and outdoor hanging pendants to path lights and post lanterns.  Work with the experts to devise fabulous landscape lighting designs and prepare your outdoor environment with quality security lighting customized to enhance the beauty of your home.