Although there are many options out there for heating your home, electric heating options have become one of the most popular solutions in many areas of the country. It is generally clean, low-maintenance heating that gives off no soot or fumes associated with combustible heat sources. It is also much less expensive to install in both existing homes and new construction. Once installed, however, electrical heating can be more expensive than gas or other heat sources.

Often in addition to a central heating system, electrical heat sources are placed in homes to provide additional heat to areas that need it. This can by done by any homeowner, and generally requires no help from an electrician unless there’s the need to have additional electrical outlets installed. While this type of heating can be somewhat efficient if used properly, unchecked small heaters can lead to excessive energy usage. To prevent this, you should only use portable heaters if they have a built-in thermostat. You can also find heaters that will turn themselves on and off according to a schedule. These advanced features are more expensive, but can be very convenient.

The various types of electric heaters include:

Storage heaters are fairly large heating units, which are mounted to a wall and must typically be installed by an electrician. These heaters are unique, in that they generate heat during off-peak times so that your electrical bills remain low. They will then release that stored heat during the day. In order for this type of heater to work efficiently, special off-peak meters must be installed and agreements with your utility company must be made. This is one of the cheapest types of electrical heating to have installed, but it can be more expensive than other central heating options.

You can find a variety of fan heaters in nearly every store that you visit during the winter. This relatively cheap, portable solution can provide fast, portable heat to a small area. This makes them ideal for providing additional heat to areas that need it. Convector heaters are bigger than fan heaters, but provide more long lasting, even heat. While they take longer to heat up, they make little to no noise, which makes them much more appealing than heaters with noisy fans. There are many options available, most of which do not require the assistance of a licensed electrician.

Under floor heating is an excellent solution in many ways. If you are building a new home, this may be an especially great option for you. Because it can be very invasive, however, under floor heating is not recommended for pre-existing structures. Heat is generated and distributed through a network of electrical heating cables that are placed under your floors.

Another home or office heating methods that’s gaining popularity today is the electric fireplace. Because they require less maintenance than traditional wood or gas fireplaces, many people are choosing this aesthetically pleasing heating option. These fires provide various levels of heat, as well as a visually pleasing fire effect. Regardless of the electrical heating solution that you choose, make sure that you look into the different options and choose the one that is best suited for your needs. If you have any doubts or questions about the use and installation of an electrical heat source, get in touch with an electrician in Los Angeles, such as The Electric Connection. We are a licensed, bonded and insured Los Angeles electrician. We will be more than happy to discuss the different types of electrical heat sources that are available, as well as what the installation requirements would be.

Click here to visit our website.

Modern day living is highly reliant on the use of electricity and the different appliances, equipment and fixtures it powers. Industries are even more reliant on electricity and their profitability is closely knit with how seamlessly their systems operate. They rely on electricity to such an extent that they rarely give it a second thought; well, at least not until something goes wrong such as:

Most of these problems can be attributed to poor power factor. Let’s understand a little more about what that is.

Power factor is essentially a measure of how effectively the incoming power is being used by the electrical equipment on your premises. It is expressed in terms of a numerical value in the range of 0-1. A higher power factor indicates that the electrical equipment is being used more effectively.

For instance, if the power factor is 0.8, it indicates that 80% of the power supply to the equipment is being utilised effectively and that 20% is being wasted. Regardless of what this ratio of effective usage Vs wastage is, the latter is an unnecessary expense. Typically, your power factor should be closer to 1; it indicates that your site is using energy in an efficient manner.

A number of businesses are currently being charged a kVA tariff and not a kilowatt tariff. This means, your service provider is probably charging you for the power they supply to you, rather than that you actually use. Simply put, you are paying for power that is being supplied to you, but which is being wasted. If your business has a low power factor, it means you pay even more for this waste. There is another aspect you should keep in view. As mentioned at the start, poor power factor has the potential to cause power drops and power losses; in turn, these lead to motor failure and overheating and failure of other equipment too.

Installation of Power Factor Correction equipment might just help avoid prohibitively expensive infrastructure upgrades; it does this by reducing the current electrical demand on your system & improving the efficiency stability. Based on which tariff you are on, power correction might just prove to be an excellent way for your business to deescalate its electricity costs.

The power factor can be improved by installing Capacitor Banks. These are PFC (Power Factor Correction) equipment and help correct the inefficiencies in the energy supply. Apart from this, they also reduce the peak demand on the power network. This is an effective and cost-effective solution to reduce your power bill as it helps lower the monthly demand and the capacity charges. Generally, the payback periods for PFC are between 1 and 3 years. Taking the life span of the PFC equipment into consideration & the potential savings, this investment can prove to be very worthwhile for you.

If you feel that you are paying too much for electricity, we at Allround Electrical can conduct a survey of the equipment used on your site and map their electrical consumption against the power your plant is using and is being charged for. We will then provide you a report of what your power factor is; and if it is low, how it can be corrected. For more information, call us at 1300 169 263. You can also drop us a line via email.

Thanks for reading,1300 169 263

Get him two Battery operated LED Picture Light.

source) Make sure your BBQ Master has enough light to control the flow of wickedness with the Black Mo Tools Axe by Brook & Hunter and a Power Box 360 stereo by Bosch is a dust and moisture resistant powerhouse with a rubber cage exterior. Rock the night away with a LED Headlamp for smaller, intricate ones that need direct light.

You know the kind — he has the biggest TV you’ve ever seen and has an entire room devoted to it. Upgrade the man cave with his favorite LED Fiber Optic Star Ceiling Kit.

This is the second blog post in this year’s 15 smart gift ideas for students of any age. Visit our Holiday Specials!

Customer service is important, especially when it comes to a vital service. When you choose your electrician in Beverly Hills, you want to be sure that they are prepared to offer the type of service you need to meet your specific electric system goals.

There are many ways in which electrical needs differ in this area from other parts of the state and the country. We are fortunate enough to have a climate that allows us to use our outdoor spaces as, when planned correctly, an extension of our homes. Custom exterior lighting projects, including landscape lighting, are among the specialties that should be offered by a knowledgeable electrician. Some other services might include whole house surge protectors, hard wired smoke alarms, as well as a variety of other electrical services.

When it comes to customer service, an electrical contractor needs to run a tight ship. If you schedule a service call for a specific time and the technician arrives late, your service call should technically be free due to any inconvenience that may have been caused. It’s a matter of principle. Letting one minute slide leads to 10 minutes, and then it’s all downhill from there. Respecting your time is an essential part of quality service..

We at the Electric Connection are proud of the high standards we’ve set and continue to maintain. Our fast response times and efficient technicians have earned us an excellent reputation throughout the region. We look forward to having the opportunity to helping you to get your custom projects successfully completed, and are always happy to assist during the planning stages of such projects. Give us a call if you’d like to talk to a Beverly Hills electrician about necessary repairs or upgrades for your electrical system. We offer free estimates and free over the phone electrical help, and all of our work comes with a lifetime guarantee.

We are accustomed to meeting and exceeding the goals of custom projects, as well as providing the full menu of electrical services, including standard as well as specialized services. We’ve been working in the area for 30 years, and we understand the needs of our electrical service clients.

Click here to visit our website.