In typical fashion, Sedaris humorously depicts his family in order to illustrate his point. He remarks that if his father were a talking doll with a pull cord, who spoke his most common phrases whenever the cord was pulled, he would mechanically utter “Turn the damn light on!” followed by “Turn that damn light off!” This would be, of course, in reference to the overhead lights. David Sedaris remarks that the latter phrase – Turn that damn light off! – is one that has become a standard from his own lips.

He brings us to the center of his early family life, the kitchen table. We see his father sit down to eat the meal his mother has prepared and exclaim, seconds after sitting down, that he can’t see his food, and would someone please “Turn the damn light on!” This causes dismay. His mother prefers candlelight and always has candles at dinner. Once the overhead lights blast on, everyone looks “sallow.” The colors are all washed out. The gravy stains above the buffet again become visible and unforgivable. Once his father leaves, David and his siblings flick off the lights again and sit around the table in candlelight for hours, smoking cigarettes as a family unit.

“Everyone looked better in the soft glow of a candle,” writes Sedaris.

We are then led to his teenage bedroom and his dormitory, where Sedaris shows us that, as someone particularly attuned to the lighting in a given room, one who could actually achieve “shivers” from the way that sunlight played in slats on his well-made bed, he was inherently different from “other guys.” He was very neat and very concerned with aesthetics.

What made him different in his younger years is what unites him to his long-time life partner, Hugh. They have very different taste in books and movies but both abhor overhead lighting. He writes, “it’s enough to keep us together. Every night the candles are lit and placed on the kitchen table. In their glow I can see the person I met almost 25 years ago, young again, and dashing. The effect is even better when I take off my glasses, leaving nothing between him and the eyes I have ruined with a lifetime of reading in the dark.”

I think it’s very interesting the way Sedaris celebrates dimness like it’s a comfort, something to wrap around oneself in a too-bright world. The fantastic comfort of illusion, of softening, of flattering alteration, is something you might expect to be valued by a creative writer like Sedaris. I agree completely: Candlelight is great. However, I’m not a candlelight every night kind of guy.

The quality of your home’s electricity can have a huge impact on your overall mood and safety, so why not consider electrical lighting upgrades in Manassas this year? You certainly don’t want to spend more time in 2016 worrying over whether you have working electricity than you will actually relaxing in your home. Not to mention, electrical problems can prevent you from having reliable lighting that will help you carry out your day to day activities!

If you live in an older home, you probably have wiring that was designed to support far less voltage than the demands of today’s modern equipment, like computers and home entertainment centers. The wiring might also be starting to decay, leading not only to potential power losses, but fire hazards as well. In many cases, you should invest in at least partial—if not whole-house—rewiring to upgrade your home so it can handle the electrical load and prevent hazards.

Here are a few signs to look for that may warn you it’s time for wiring replacement.

Christmas is upon us again and more than any other time of year, it’s the time of year where people put strain on their electrical system.  The lights on your house and the beautiful decorations you’ve been storing in your attic finally are brought out and plugged in for your friends and neighbors to view and appreciate.  And, of course, the vast majority of homes you visit have at least one Christmas tree.  Since most of these things are electrical, it’s probably not a surprise to you that, as a top Dallas electrician, I start getting a lot of calls this time of year.  Though it’s always nice to have the business with Christmas so close, I thought it’d be great to share with ways to avoid wiring problems with your Christmas decorations this year:

             In general, there are a few important tips that can help you avoid wiring problems.  If your lights look frayed or dangerous, they should always be replaced or repaired before using them, frayed wiring are hazardous.  You should take care that your electrical source is safe before you even begin the installation process.  To avoid the potential for overloads, you should have dedicated circuits installed for your holiday decorations.

Most importantly, you should never try to supply power for your lights without contacting a top Dallas electrician to help you install the necessary equipment and make the necessary safety precautions.  Short cuts are potentially dangerous. I can remember one example where a customer had supplied power to their lights by splicing an extension cord directly into their circuit breaker box!  Even worse, they’d shut the breaker box door, pinching the cabling!  Left unchecked, even if this hadn’t started a fire, damage from a power surge or overload could have easily destroyed their whole breaker, meaning they’d have to spend thousands to repair the damage at the absolute worst time of year!

5-pin SPDT (single pole, double throw) automotive relay.

Relays are essentially two parts in one package. The first part is an inductive coil (pins 85 and 86). This coil is the “trigger” function of the relay. By applying both a positive (+) and ground (-) to the contacts, current passes through the coil. When current passes through the coil, a magnetic field is generated and moves the switch (the arrow in the diagram). This is where the second part of the relay comes into play.

The second part of the relay is the “switch.” The switch has three interface contacts—common, normally closed, and normally open. “Normally” refers to the state of the relay not being energized.

While relays can be used for virtually any task, there are some very useful, simple applications for adding LED lighting to a vehicle. Please note that this wiring only pertains to the relay—not the wires in the vehicle. Before interfacing with a wire in a vehicle, always ensure you test the wire with a digital multimeter first to confirm circuit function.

Positive Switching

Positive switching is used for applications where the “trigger” for your switch or circuit is positive. This could be an ignition, brake, or reverse light wire for example.  This could be used for applications such as off-road light bars, work lights, additional brake lights, and other exterior lighting.

Negative Switching

Negative switching is used for applications where the “trigger” for your switch or circuit is negative. Negative triggers are often found in door, hatch, and trunk triggers as well as many interior switches. This could be used for applications such as footwell lighting, truck bed lighting, under-hood lighting, and other interior lighting.

Switch Activated With Ignition Override

This is useful for applications where you want to turn your light on or off with a switch but only want the light to remain on when the car is running or key is in the “ignition” position. The main advantage to this is—even if the switch is left on—the light (or output circuit) will shut off when the key is turned off so that the battery will not be run down.

For technical questions, don’t hesitate to call us toll free at 866-590-3533. Our customer service and technical support teams are available from 8:30 a.m. to 8 p.m. CDT Monday-Thursday and 8:30 a.m. to 4 p.m. CDT on Friday.