Flickering lights do not always signify a serious issue with your electrical system. What’s more important to note is which lights flicker and how. This is a relatively common issue that can have a variety of explanations. To get a better idea of how to address your flickering lights, tailor your solution to the specific situation.

If none of the above apply, try investigating the light switch itself next. Switch the light on and off a few times to see if the flickering dies down. If not, you may have a faulty switch that needs to be replaced by an electrician. Similarly, if you replace the bulb on a plug-in lamp and it still isn’t working, try plugging the lamp into a different outlet. It’s possible that the issue could be stemming from the socket. This type of issue should also be troubleshooted by a professional, as in-depth electrical work can be dangerous.

If you’re not sure what might be causing the problem, it’s wise to call a licensed electrician to check it out. The tips above can help you narrow down what might be going on, but doing risky electrical work yourself isn’t recommended.

In today’s day and age, we rely on electronics for everything. Do you have a plan to deal with the fallout if the grid goes down due to accidents, weather, or other occurrences? A backup generator can help get you through these difficult times, keeping water flowing and well pumps running, powering sump pumps to protect your property from flooding, keeping food in refrigerators safe, providing fans, air conditioning or heating for protection from weather, and more.

Installing a backup generator can help you safely and effectively deal with the following situations:

Do you know how to safely install and operate your backup generator? Contact Mr. Electric® today. Our professional technicians have the knowledge and skills to get your generator – and you - prepared for all life has to throw you way.

The choice of a LED product is guided by watching specifications tables. Here is one table accompanied by the explanation of the features. The result should be a good lighting solution that is leaving a green ecological footprint. A good lighting solution is emitting enough light that the tasks in space can be conducted properly. First the lumens of the fixture (responsible for brightness in the room), the CRI (how good is the lighting concept representing colors), color temperature (how is the ambience in the room) and lumen per watt (efficiency of the system) are recommended to be watched. These criteria are responsible for a good lighting quality and energy efficient solution.

The other features are necessary information too. They serve further details about the fixture, the setup and maintenance of the lighting system.

(1) Type: The products name is a detail for purchasing the fixture

(2) Wattage: Defines the energy consumption of the fixture, which is important for the electrician and the ecological footprint of the system (referring to Lumens per Watts)

(3) CRI: Important character in areas where colors should be truly represented. For applications where people are involved, a CRI lower than 70 is not recommended. In shopping areas a CRI of 90 and higher is applicable.

(4) Lumens: responsible for the brightness in a room. The more lumens, the brighter the fixture is illuminating the space.

(5) Lumen per Watt: Efficiency of the lighting system. The higher the lm/W the better the ecological footprint of the product.

(6) Lumen Maintenance: how fast LEDs lose their brightness compared to new products (most manufacturers refer to the time when most of the LEDs reach 70% and less of the initial lumen output)

(7) Color Temperature: defines the mood or ambience in a room. Low quality lighting fixtures mostly have a very cool color temperature as these LEDs are more efficient than warm white LED products. A color temperature higher than 6000K is not recommended for a lot of areas.

(8) Beam Angle: the light is radiated into the indicated beam angle. LEDs are direct light sources with typical beam angles of 120° till 180°.

(9) Life Hours: defines the lifetime of a LED product. LEDs last 50,000h up to 100,000h.

(10) Replaces: a helpful information for replacing conventional light sources

(11) Working Voltage: high quality LED products have an integrated driver, Retrofit Solutions are delivered with the suitable ballast already.

(12) Frequency: detail about the admitted voltage frequency

(13) Power Factor: Efficiency of the ballast

(14) THD: Total harmonic distortion is describing the distortion caused by ballasts and other inductive loads of the input current on alternating current (AC) power systems

(15) Operating Temperature: The light source is operating under the mentioned conditions according to the manufacturer datasheet, other temperatures will cause the light source to fail or work not properly (e.g. light loss, different color temperature)

(16) IP Rating: the protection of the light source, ballast and wiring against liquids and solid objects

(17) Dimmable: dimming is the change in light source brightness, mostly undertaken by smart controls

(18) Dimensions: the fixture’s size, important for the definition of the mounting position and space

(19) Net Weight: the fixture’s weight, important for the mounting construction, e.g.ceiling strongness needs to be considered

(20) Housing: the housing is the surrounding of the light source and ballast, the higher the IP rating, the better the protection against liquids and solid objects which is important in car washes for example, the coating is important in swimming halls where the luminaires are exposed to chloride and humid conditions

(21) Mounting: possible mounting ways like pendant, surface or hock mount

(22) Warranty: how long after purchasing, the products are ensured working properly

Rats and mice are quite common house pests; once they find your home to be a safe place to live in and that there are different sources of food there, they will be reluctant to leave. Not only do they pose a health hazard, they also tend to cause a lot of damage to various features on your property and will chew through the insulation of your electrical wiring.

This can affect the system and impact the supply of electricity throughout your property and can be a fire hazard as well. Here are some effective tips to prevent rodent damage to the electrical wiring in your home:

Since rodents are nocturnal creatures, you won’t really see them running around your home in the daytime. However, if you are wary, you will surely hear scratching and chewing sounds in the walls of your homes. You may also hear scurrying noises coming from the attic. You should look out for nesting material or droppings and will typically find these in enclosed spaces.

It’s important to check the wiring’s insulation with regularity to ensure that it’s intact and that it hasn’t been chewed by rodents. The unfortunate part is that this isn’t something you can do for wiring behind walls. However, if you are undertaking any repairs, renovation or upgrades, take that as an opportunity to check the wiring for signs of rodent damage.

If you notice any flickering or experience power fluctuation in a certain room or part of the house, or if you find that a certain circuit breaker keeps tripping for no specific reason, get the system checked for rodent damage.

If you notice any signs of a rodent infestation, it’s important that you act without delay and take some steps to get rid of them. Buy some spring traps and rat poison from your local hardware store and set these at different places where you have seen rat droppings or heard noises. Even as you do this, it’s equally important that you also identify where these pests are entering your property from. Place the bait or poison at these points along your home’s exterior walls.

If you find the infestation to be too severe or if you aren’t too confident about using DIY rodent control measures, call a licensed electrician to inspect the wiring and check it thoroughly for damage. If they confirm that the damage has been caused by rats, it’s a good idea to call pest control professionals to handle the rodent control for you. They will provide solutions and give you advice on the steps you can take to prevent these pests from entering your property.

While the rodent control professionals will ensure that the rats are eliminated from your property, they will also advise you on how to seal all the possible rodent entry points in your home. Aside from very evident points such as doors and open windows, these pests can easily squeeze their way into the indoor spaces of your property through holes and large cracks. If the cracks are too small, they won’t shy from chewing their way in through the loose concrete of the walls.